Problem with my M05 Stearing

Subject: Re: Problem with my M05 Stearing Wed May 12, 2010 7:56 pm

Not sure what you do or dont know about radios, but check your steering trim, end point adjustments and dual rate.

cut a long story short turn your steering end points up to the maximum, dual rate to maximum also, then set your steering trim so that the car goes straight.

now hopefully your wheels should turn the same amount left and right.

Sorry if you know and have tried this already otherwise have a go,

Duane.

Subject: Thanks Wed May 12, 2010 10:07 pm

cathurga wrote:

The tower pro servo should fit, as Paul says. I used one in my mini as well (or it may have been the towerpro 9955, not sure) and it worked.

If you are using the Tamiya ESC, be careful, I have fried to Tower servos on Lipo batts.

@Paul,Thanks a million,I didnt notice the other part.It all perfect now... clapping

@Cathurga,Thanks for the Heads up,As of nw im using NIMH and not yet reached lipo's

@All, Thanks alot guys.....Everythings s perfect nw....i had to change a part and adjust the push rod by quite a bit and everythings s smooth......Thanks again guys,would have not got this job done with out u'll.

dance

Best regards,
Lucas