Brushless help

Subject: Re: Brushless help Fri Jun 04, 2010 10:16 pm

Once again guys,thanks a lot for all ur opinions..

I have one more questions...what is the difference b/w a sensored BL and the other thingie...im sorry i didnt know the name...What would you recommend,and why?

Regards,
Lucas

Subject: Re: Brushless help Fri Jun 04, 2010 11:17 pm

Abdul Basit wrote:

Biggest difference between sesorless and sensored is the response time.

Sensored motors are said to respond quicker, like when you start moving from a stand still.

Also, it's said that they have more predictable low speed and breaking.

But I haven't ever used a sensored motor, I just read about the differences when I purchased my brushless. So you might want to confirm the differences by talking to someone who has actually used both.

@Driftfreek, there.

Subject: Re: Brushless help Sat Jun 05, 2010 1:55 am

Abdul Basit wrote:

Biggest difference between sesorless and sensored is the response time.

Sensored motors are said to respond quicker, like when you start moving from a stand still.

Also, it's said that they have more predictable low speed and breaking.

But I haven't ever used a sensored motor, I just read about the differences when I purchased my brushless. So you might want to confirm the differences by talking to someone who has actually used both.

@Driftfreek, there.

@Abdul,Thanks for that.

Subject: Re: Brushless help Sat Jun 05, 2010 4:28 am

.j0sh wrote:

@Lucas
The EZrun BL system is proven to be good.
Bad side is that it's a Sensorless BL. Mainly meaning it 'stutters' at low RPMs.
Precise throttle control may be a bit harder to achieve.

And there.

@Abdul
Have you noticed if your BL system stutters when at low speed?

_________________
KIT: Tamiya TA05-3R
ELECTRONICS: Novak GTB V.2, Novak Ballistic 3.5T, Futaba 3PM 2.4Ghz FASST Tx, Futaba R603FF FASST Rx, Yeah Racing SVP-0010MG
SHELL: Tamiya Evo VI, Tamiya Evo X, HPI 350Z

Subject: Re: Brushless help Sat Jun 05, 2010 9:50 am

Yeah... It does.

It's also nearly impossible to cruise on a slow/dead slow speed.

I used to think it's just my hand, but after asking other people on other forums (knock off alert!), I found it it's because of the sensorless motor.

Subject: Re: Brushless help Mon Jun 07, 2010 12:26 am

Do the sensorless systems stutter off the line...... YES
Are sensorless systems difficult at very low speeds....... YES

Does it really matter for drifting .........I don't drift but I would guess NO
Does it really matter for racing .......... No, Not at the standard we race at very happy

Are sensorless systems cheaper to buy...... YES
Is a sensored motor combo a better system ........YES, but we are not Pro's here.

So unless you are a Pro and are looking for that little extra bit of performance to get that little extra edge against your competition, then just get the sensorless system. They are cheap reliable and will give you all the power and fun you need.

Subject: Re: Brushless help Mon Jun 07, 2010 8:54 am

Gregs right the advantage for drifting and racing is minimal, the only place were sensorless will give you an edge is in rock crawling where you need the motor to be smoooooth at low power, and no motor cogging! very happy

Subject: Re: Brushless help Mon Jun 07, 2010 11:05 am

gerg wrote:

Does it really matter for drifting .........I don't drift but I would guess NO

So unless you are a Pro and are looking for that little extra bit of performance to get that little extra edge against your competition, then just get the sensorless system. They are cheap reliable and will give you all the power and fun you need.

I beg to differ with the first statement sir.
It does matter in drifting.
It's called "throttle control".
Not the "bang bang bang" and "trigger-happy" technique.
In drifting, the tires have more grip at lower RPMs. <----- Tip to those still drifting here.
You just need to know when to use it.

I will agree on the second statement.
One does really need to be 'immersed in the game' to understand the benefits and disadvantages of various electronics.

_________________
KIT: Tamiya TA05-3R
ELECTRONICS: Novak GTB V.2, Novak Ballistic 3.5T, Futaba 3PM 2.4Ghz FASST Tx, Futaba R603FF FASST Rx, Yeah Racing SVP-0010MG
SHELL: Tamiya Evo VI, Tamiya Evo X, HPI 350Z