some updates over the weekend ......

a view of the bottom ...


Flourine TRF's assembled and Rear Upright 1 degree Toe in installed .....




a view of the front bulk head ......




view of the front bulhead (TOP VIEW from the rear) .... the IFS shock configuration is lookin spot on



13T 3000KV Yeah Racing BL Motor with 23T Pinion Gear installed ....






with my M-03 .....





i'll be finalizing the lay out for the electronics once i get hold of my servo .....

the battery holder was a good fit but i still cant finalize anything until the servo is in place .....

will update as soon as something comes up ......

thanks for lookin

very nice very very nice....

installed the ESC and Spektrum Rx ...... started to lay-out the wirings just to see if everythings in place with the battery box ....






i changed the front springs to the tamiya shord mediums ..... the long ones were giving me positive camber .....

the short ones had better angle but gave me extra droop when the car is off the surface .....

i also put in spacers in the TRF shocks in the front and the rear to have my shock length at 55-56mm ....




now i have the ride height set at around 6mm off the ground .... which i believe is just perfect ...



hopefully i get my low profile servo by this week and its off to the track for some test runs ....

now its turning into a monster! nice work strawb

Do those open gears have some sort of a plastic cover?

WoWieeeee!! ..she is beeeautiful!!, i wont allow her to be bashed!! dont worry baby ill rescue you theehee... and isint that a brushless motor i see in there!!, how many turn?

the gears are open ....... you can put some lexan plastic to protect it but i don't see the issue with it being open .....

i think its not that big of a deal ....

once the build is done .... i'll give it a run and give my insights .....

folks from rc-mini.net seem to have no complains with the open gears as well .....

anyways ..... we'll find out

hi gerg ...... yes i used the original gears for the M-03/M-05 but im using a Tamiya Ball Diff instead of the stock Gear Diff .....

Hi,
Any updates ? has it been out yet ?

I would also like to say thanks for taking the time to take and post all the pictures, I know some of them are a little blurred but otherwise there are some very good photographs.

Duane

hi duane ...... im still waiting for my low profile servo and hpi radials before i officially launch her out for some test runs ....

ordered a swift shell to go with it as well ......

other than those 3 items ...... its all good to go


i will give my reviews after ....

hows your m-03 project going?

thanks

Hi
I just got back last night so will start this week and hopefully have something running by next weekend.

Looks like mayhem is going to be slippery enough this week anyway without the extra power.

Duane

low profile servo is installed ......

all i can say with the xevo is that it is glued to the ground ...... i used the stock tamiya tires just so i can see how it will handle from the tires i have least traction from .... and i was using a 13T year racing BL system ...... which runs more like a Tamiya ST motor from what i can see ....

and to my surprise it still handles very well ....... this is out of the box stock and i have not added any weights or adjusted any suspension settings yet .....

xevo is a thumbs up .......