Work In Progress - F22

Subject: Re: Work In Progress - F22 Thu Feb 25, 2010 5:56 pm

Update:
New plan I built from scratch, to accommodate my EDF.

F35-C Carrier Variant 1:18 scale

Subject: Re: Work In Progress - F22 Wed Mar 10, 2010 10:34 am

UPDATE:

Fully assembled, Maiden flight today smile

Mounted: 20amp ESC, 3S1P Lipo 1000mah, Spektrum 6110E DSM2 receiver, 2x 8g servos(for mixed elevon) and Dragonmart EDF.

It's a bit heavier than I expected. So imma need to fly this thing fast to get the lift.

I got this as well, just incase. twisted evil

Subject: Re: Work In Progress - F22 Wed Mar 10, 2010 3:33 pm

very nice

good luck on your project man smile

i hope to see it very soon flying sideways hehehehehe smile

Subject: Re: Work In Progress - F22 Wed Mar 10, 2010 6:37 pm

gr8 job hope to see it flyin soon..JUs make sure ur wearin a PARAshuT!!,,jus in case hehe very happy

_________________
You win some, lose some, and wreck some!!

Subject: Re: Work In Progress - F22 Fri Jun 18, 2010 7:51 am

im following this thread with interest!
crom2k1, where exactly you get this depron?
i cant find any stationery shop here in dubai selling those.

Thanks,
Em

Subject: Re: Work In Progress - F22 Fri Jun 18, 2010 3:41 pm

I have also been going aerial recently, just buit this.

Hopefully will get to maiden her soon.

She has a 49" wingspan, twin 64mm ducted fans with a 40A and 80A Esc combo. 7 x mini servo's and working retracts. She is powered by 2 x 2200Mah 11.1V Lipo's.

Mechanic Posts: 45 Join date: 2009-08-15 Location: Dubai

cathurga wrote:

I have also been going aerial recently, just buit this.

Hopefully will get to maiden her soon.

She has a 49" wingspan, twin 64mm ducted fans with a 40A and 80A Esc combo. 7 x mini servo's and working retracts. She is powered by 2 x 2200Mah 11.1V Lipo's.

Nice plank you got there It is A-10 warthog close ground support aircraft clapping

Subject: Re: Work In Progress - F22 Sat Jun 19, 2010 1:36 pm

Thats the one! It is a really 'draggy' airfram but the long, straight wing and undercamber allows it to slow down for some nice scale flying, it isnt a rocket ship, but it goes really nicely. It comes with a whole bunch of ordinance which you can put under the wing, but I will only stick them on after her maiden flight..